KANCA METAL SHEAR MS-2BR4mm
Ψαλίδια πάγκου Λάμας επαγγελματική ποιότητα με εύκολη λειτουργία και μαχαίρια υψηλής σκλήρυνσης (δεν λιμάρονται) και πολλαπλής χρίσης (κάθε μαχαίρι μπορεί να χρησιμοποιηθεί και από τις τέσσερις πλευρές), διαθέσιμα ανταλλακτικά. Διαθέσιμα 6 διαφορετικοί τύποι ανάλογα με το πάχος της λάμας που κόβουμε (4mm,5mm,6mm,4mmLong, 8mm,10mm)
Η πλέων επαγγελματική επιλογή,
Τεχνικά Χαρακτηριστικά:
Code: 60602010120
Μήκος Μαχαιριού: 120mm
Πάχος Κοπής: 4mm
Διαστάσεις Λάμας : 50Χ4mm
Κοπή Στρογγυλό (Φ) : Φ 11mm
Ύψος χωρίς τον λεβιέ : 20mm,
Πλάτος : 26mm
Βάρος : 8.0Kg
Safety Infortmation
- Misuse of shear can cause serious injury to eyes, hands,…etc
- In order to ensure safety, shear must be set up and used properly.
- Please read, understand and follow all instructions given in this safety information sheet before setting up and using the shear.
- Always wear eye, face protections and use other necessary safety wear wear while working with the metal shears.
Metal Shear user’s manual
- Make sure that you bolt your sheet metal shear safety and securely to a suitable to a suitable platform.
- Remove the safety pin before opersting the shear. Stand at a safe distance from the cutting area during operation. Always wear hand and eye-protection.
- Do not use the shear without the support and always adjust for workpiece thickness.
- To prevent wear on blades and other moving parts always lubricate on regular basis.
- Do not alter lever arm lenght (or use excessive force) as this may impair cutting caapcity and/or damage the shear.
- Shear blades are factory-set with appropiate working clearance.
- Do not use the shear to cut metarials above the permissibla limit specified on the label.
- Shears are designed to cut St 50 or equivalent material with max. hardness of 150 HB. Higher hardness or stainless steels are not permitted.
- While sharpening worn blades make sure cutting angles are preserved.